Original GoolRC X5C 2.4GHz 4CH 6-axis Gyro 2.0MP HD Camera RC Quadcopter with One Key Return CF Mode 360° Eversion Function
Choose your country:
100% brand new
Compact and lightweight design
With LED light, possible for night fly
360° eversion function for you to experience cool flying play
With headless mode, no need to adjust the position of aircraft before flying
One key to return function makes it easily to find the way home
With 2.0MP HD camera allows you to take photos and record video
6-axis gyro quad, strong stability, easily implement various flight movements
Brand name: GoolRC
Item name: X5C RC Quadcopter
Remote control: 2.4GHz / 4 Channels / mode 2
Gyroscope: six axis
Camera: 2.0MP HD camera
Function: 360° Eversion, CF mode, one key return, up, down, left, right, forward, backward, hovering
Remote distance: about 50m
Battery for quadcopter: 3.7V 500mAh Lipo Battery
Charging time: about 70-90 minutes
Working time: 4-5 minutes
Battery of remote controller: 4 * AA Battery (not included)
Battery dimensions: 43 * 25 * 8mm
Item dimensions: 315 * 315 * 85mm (deviation due to manual measurement)
Item weight: 110g
Package size: 27 * 27 * 12.3cm / 11.8 * 9.1 * 5.7in
Package weight: 670g / 1.5lb
Gift box package
Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
This RC drone is equipped with coreless DC motors, continuous using with different batteries is not suggested.
This RC model is not a toy and is not suitable for children under 14 years old, keep it away from children.
Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.
1 * GoolRC X5C RC Quadcopter
1 * Transmitter (mode 2)
1 * 2.0MP HD Camera
1 * 4GB Micro SD Card and Reader
1 * 3.7V 500mAh Li-po Battery
2 * Pair of Spare Propellers
4 * Protective Guard Ring
2 * Landing Gear
1 * USB Charging Case
1 * Screwdriver
1 * English Manual
FAQ of the aircraft:
1. The aircraft fail to connect with transmitter.
Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds.
2. One or more motors don't work.
Drone should stay on a flat surface during the binding, or motor is damaged.
3. Battery problems (can't be charged, swelling, etc).
Battery damaged, suggested to change a new one.
4. Accessories missing.
Check gift box package inside and outside carefully. Contact custom service.
5. The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propeller is installed in the right way.
Ask a new question
please Enter your Name
Please enter a valid email address.
You've entered the wrong email format!
Please enter the content
Please enter a 5-3000 characters.