Simple structure and light weight, CNC aluminum alloy structure.
Brushless motor direct drive.
With anti-vibration rubber balls, easy to adjust.
Compatible with Gopro 3 3+.
With 2pcs 2208 motors and BGC2.2 gimbal controller, sensor.
With motor protector which can help heat dissipation.
Specifications:
Motor: Model 2208 KV80 Brushless motor
Control panel: BGC2.0 Brushless control panel
Software: BGC 2.2
Material: CNC Aluminum alloy
Strap: For GOPRO camera strap
Compatible camera: For GOPRO 3 3+ series
Mounting plate pitch: 20mm / 0.8in
Battery plug type: JST plug
Voltage: 12V
Compatible model: For DJI phantom I, walkera x350
Color: Silver
Item size: Approx. 8 * 8 * 8cm / 3.1 * 3.1 * 3.1in (L * W * H)
Item weight: 213g / 7.5oz
Package size: 18 * 13.5 * 9cm / 7.1 * 5.3 * 3.5in
Package weight: 361g / 12.7oz
Notes：
Before power the Gimbal, please make sure the Camera has been installed; Or the Gimbal Controller may get damaged！
Package List:
1 * Aluminum Gimbal Installed 2 Motors
1 * Gimbal Controller
1 * Sensor
2 * Wirings
1 * Bag of Screws
(Other accessories are not included)
How to install:
1. Remove the damping balls, open the top cover of the mounting plate;
2. Install the top cover of the mounting plate to the bottom of the DJI phantom 1
3. Install the damping balls.
4. Install your GOPRO 3 3+camera, and fasten it with straps.
Notes:
Please do not energize the PTZ until the battery is mounted in the GOPRO 3 3+ camera which is fixed on the PTZ. Otherwise, the center-of- gravity position of the PTZ will shift, which will makes it vibrate. Power supply of the PTZ is recommended as 12V.
We test and tune every single brushless gimble before shipping to ensure the ease of use.
Please make sure the positive and negative terminals of the item are correctly connected. Misconnection will lead damage to the control board, which is Not under warranty.