Original GoolRC T8C 2.4GHz 4CH 6-axis Gyro 2.0MP HD Camera RC Quadcopter with One Key Return CF Mode 360° Eversion Function
- Overview
- FAQ
- Reviews
Features:
100% brand new.
Compact and lightweight design.
With LED light, possible for night fly.
360° eversion function for you to experience cool flying play.
With headless mode, no need to adjust the position of aircraft before flying.
One key to return function makes it easily to find the way home.
With 2.0MP HD camera allows you to take photos and record video.
6-axis gyro quad, strong stability, easily implement various flight movements.
Specifications:
Brand name: GoolRC
Item name: T8C RC Quadcopter
Material: ABS
Colour: yellow/red optional
Remote control: 2.4GHz / 4 Channels / mode 2
Gyroscope: Six axis
Camera: 2.0MP HD camera
Function: 360° Eversion, CF mode, one key return, up, down, left, right, forward, backward, hovering
Remote distance: about 70-90m
Battery for quadcopter: 7.4V 1800mAh Lipo Battery
Charging time: about 100-120 minutes
Working time: 5-7 minutes
Battery of remote controller: 6 * AA Battery (not included)
Battery dimensions: 80 * 33 * 15mm
Item dimensions: 450 * 450 * 175mm / 17.7 * 17.7 * 6.9in
Item weight: 575g
Package information:
Package size: 35 * 34 * 18cm / 13.8 * 13.4 * 7.1in
Package weight: 2019g / 4.5lb
Gift box package
Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
Notice:
This RC drone is equipped with coreless DC motors, continuous using with different batteries is not suggested.
This RC model is not a toy and is not suitable for children under 14 years old, keep it away from children.
Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.
Package list:
1 * GoolRC T8C RC Quadcopter
1 * Transmitter (mode 2)
1 * 2.0MP HD Camera
1 * 7.4V 1800mAh Li-po Battery
2 * Pair of Spare Propellers
4 * Protective Guard Ring
4 * Landing Gear
1 * 4GB Micro SD Card and Reader
1 * Battery Charger (EU plug)
1 * Screwdriver
1 * User Manual
FAQ of the aircraft:
1. The aircraft fail to connect with transmitter.
Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds.
2. One or more motors don't work.
Drone should stay on a flat surface during the binding, or motor is damaged.
3. Battery problems (can't be charged, swelling, etc).
Battery damaged, suggested to change a new one.
4. Accessories missing.
Check gift box package inside and outside carefully. Contact custom service.
5. The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propeller is installed in the right way.